PRODUCT DETAILS
| Name | 6 stage filtration under sink ro water purifier |
| Model No | KK-RO50G-C |
| 1st stage | PP filter cartridge |
| 2nd stage | UDF filter cartridge |
| 3rd stage | CTO filter cartridge |
| 4th stage | RO membrane |
| 5th stage | Post carbon inline filter cartridge |
| 6th stage | Mineral filter cartridge |
| Purication type | Revers Osmosis or UF |
| Color | white |
| Microcomputer control | NO |
| Booster pump | 50G pump |
| Standard sink top faucet | YES |
| Quick fittings + Food grade tube | YES |
| Instruction manual English version | YES |
| Standard parts | YES |
| Tank size | 3.2G |
INTRODUCTION of ro water purifier
* 5 stage RO system
* Standard 5-stages RO system(Auto flush)
* (PP+CTO+GAC+RO+T33)
* Auto flush
* Booster pump: 125~135psi
* Standard sink top faucet
* Quick fittings + Food grade tube
* 3.2G blader tank (plastic)
* Standard packing and parts bag
Product Note
1. The product should be promptly closed if there is leaking water;
2. In a timely manner, We recommend user to replace the filter according to replacement cycle;
3. When the water suddenly becomes considerably larger flow, Please do not drink the water;
4. Please do not customize repair or alter the product;
5. When moving the product, please do not pull the PE pipe to prevent leakage;
6. When the product is not used for a long time, turn off the water supply, power supply;
7. Do not use the rated voltage power that disproportionate;
8. After first time use it or a short time (within 1 month), when start to use itm, first two tanks of produced water should be drained; after long-term (over 1 month) stopped use it, when start to use again, should replacement activated carbon filter;
9. Use detergent to scrub it, please do not to use gasoline, alcohol and other solvents to scrub it.
Installation Note
1. Do not install under sunlight;
2. The product working temperature 5 to 45 degrees;
3. The product can not filter hot water, please do not connect to water heater.
4. Before use it, installation of the product should be fixed to prevent product
turn down;
5. If the tap water pressue is higher than 0.4Mpa, please install the pressue
limiting valve before the product;
6. Do not arbitrarily remove the parts on the product, to prevent leakage and damage
to the machine;
7. PE pipe and fittings should installed in place;
8. Water tee, no seals should be wrapped with raw materials, there is a ring of raw
materials can not be wrapped around the band;
9. After the installation is completed, you should turn on the water and gooseneck
faucet, after 5 minutes, close gooseneck faucet , and check there leaks;
10. Pure water end and wastewater end can not be inversely connected.
MORE PRODUCT
Product Tags:
|
|
CE Certified Reverse Osmosis Water Filtration System 6 Stage Filtration Under Sink Ro Water Purifier Images
|
